Between Black and White Population
Between Black and White Population
1. Comparing annual percent of Medicare enrollees having at least one ambulatory visit between B and W
2. Comparing average annual percent of diabetic Medicare enrollees age 6575 having hemoglobin A1c between B and W
3. Comparing average annual percent of diabetic Medicare enrollees age 6575 having eye examination between B and W
4. Comparing average annual percent of diabetic Medicare enrollees age 6575 having
Students will develop an analysis report, in five main sections, including introduction, research method (research questions/objective, data set, research method, and analysis), results, conclusion and health policy recommendations. This is a 56 page individual project report.
Here are the main steps for this assignment.
Step 1: Students require to submit the topic using topic selection discussion forum by the end of week 1 and wait for instructor approval.
Step 2: Develop the research question and
Step 3: Run the analysis using EXCEL (RStudio for BONUS points) and report the findings using the assignment instruction.
The Report Structure:
Start with the
1.Cover page (1 page, including running head).
Please look at the example http://www.apastyle.org/manual/related/sampleexperimentpaper1.pdf (you can download the file from the class) and http://www.umuc.edu/library/libhow/apa_tutorial.cfm to learn more about the APA style.
In the title page include:
· Title, this is the approved topic by your instructor.
· Student name
· Class name
· Instructor name
· Date
2.Introduction
Introduce the problem or topic being investigated. Include relevant background information, for example;
· Indicates why this is an issue or topic worth researching;
· Highlight how others have researched this topic or issue (whether quantitatively or qualitatively), and
· Specify how others have operationalized this concept and measured these phenomena
Note: Introduction should not be more than one or two paragraphs.
Literature Review
There is no need for a literature review in this assignment
3.Research Question or Research Hypothesis
What is the Research Question or Research Hypothesis?
***Just in time information: Here are a few points for Research Question or Research Hypothesis
There are basically two kinds of research questions: testable and nontestable. Neither is better than the other, and both have a place in applied research.
Examples of nontestable questions are:
How do managers feel about the reorganization?
What do residents feel are the most important problems facing the community?
Respondents’ answers to these questions could be summarized in descriptive tables and the results might be extremely valuable to administrators and planners. Business and social science researchers often ask nontestable research questions. The shortcoming with these types of questions is that they do not provide objective cutoff points for decisionmakers.
In order to overcome this problem, researchers often seek to answer one or more testable research questions. Nearly all testable research questions begin with one of the following two phrases:
Is there a significant difference between …?
Is there a significant relationship between …?
For example:
Is there a significant relationship between the age of managers? and their attitudes towards the reorganization?
A research hypothesis is a testable statement of opinion. It is created from the research question by replacing the words “Is there” with the words “There is,” and also replacing the question mark with a period. The hypotheses for the two sample research questions would be:
There is a significant relationship between the age of managers and their attitudes towards the reorganization.
It is not possible to test a hypothesis directly. Instead, you must turn the hypothesis into a null hypothesis. The null hypothesis is created from the hypothesis by adding the words “no” or “not” to the statement. For example, the null hypotheses for the two examples would be:
There is no significant relationship between the age of managers
and their attitudes towards the reorganization.
There is no significant difference between white and minority residents
with respect to what they feel are the most important problems facing the community.
All statistical testing is done on the null hypothesis…never the hypothesis. The result of a statistical test will enable you to either:
1) reject the null hypothesis, or
2) fail to reject the null hypothesis. Never use the words “accept the null hypothesis.”
*Source: StatPac for Windows Tutorial. (2017). User’s Guide; Formulating Hypotheses from Research Questions. Retrieved May 17, 2019 from https://statpac.com/manual/index.htm?turl=formulatinghypothesesfromresearchquestions.htm
What does significance really mean?
“Significance is a statistical term that tells how sure you are that a difference or relationship exists. To say that a significant difference or relationship exists only tells half the story. We might be very sure that a relationship exists, but is it a strong, moderate, or weak relationship? After finding a significant relationship, it is important to evaluate its strength. Significant relationships can be strong or weak. Significant differences can be large or small. It just depends on your sample size.
To determine whether the observed difference is statistically significant, we look at two outputs of our statistical test:
Pvalue: The primary output of statistical tests is the pvalue (probability value). It indicates the probability of observing the difference if no difference exists.
The pvalue from above example, 0.9926, indicates that we DO NOT expect to see a meaningless (random) difference of 5% or more in ‘hospital beds’ only about 993 times in 1000 there is no difference (0.9926*1000=992.6 ~ 993).
Note: This is an example from the week1 exercise.
The pvalue from above example, 0.0001, indicates that we’d expect to see a meaningless (random) ‘number of the employees on payer’ difference of 5% or more only about 0.1 times in 1000 (0.0001 * 1000=0.1).
CI around Difference: A confidence interval around a difference that does not cross zero also indicates statistical significance. The graph below shows the 95% confidence interval around the difference between hospital beds in 2011 and 2012 (CI: [40.82 ; 40.44]):
CI around Difference: A confidence interval around a difference that does not cross zero also indicates statistical significance. The graph below shows the 95% confidence interval around the difference between hospital beds in 2011 and 2012 (CI: [382.16 ; 125.53]):
The boundaries of this confidence interval around the difference also provide a way to see what the upper [40.44] and lower bounds [40.82].
As a summary:
“Statistically significant means a result is unlikely due to chance.
The pvalue is the probability of obtaining the difference we saw from a sample (or a larger one) if there really isn’t a difference for all users.
Statistical significance doesn’t mean practical significance. Only by considering context can we determine whether a difference is practically significant; that is, whether it requires action.
The confidence interval around the difference also indicates statistical significance if the interval does not cross zero. It also provides likely boundaries for any improvement to aide in determining if a difference really is noteworthy.
With large sample sizes, you’re virtually certain to see statistically significant results, in such situations, it’s important to interpret the size of the difference”(“Measuring U”, 2019).
*Resource
Measuring U. (2019). Statistically significant. Retrieved May 17, 2019 from: https://measuringu.com/statisticallysignificant/
Small sample sizes often do not yield statistical significance; when they do, the differences themselves tend also to be practically significant; that is, meaningful enough to warrant action.
4.Research Method
Discuss the Research Methodology (in general). Describe the variable or variables that are being analyzed. Identify the statistical test you will select to analyze these data and explain why you chose this test. Summarize your statistical alternative hypothesis. This section includes the following subsections:
a)Describe the Dataset
Example: The primary source of data will be HOSPITAL COMPARE MEDICARE DATA (APA formatted intext citation). This dataset provides information on hospital characteristics, such as: Number of staffed beds, ownership, system membership, staffing by nurses and nonclinical staff, teaching status, percentage of discharge for Medicare and Medicaid patients, and information regarding the availability of specialty and hightech services, as well as Electronic Medical Record (EMR) use (Describe dataset in 23 lines, Google the dataset and find the related website to find more information about the data).
Also, describe the sample size; for example, “The writer is using Medicare data2013, this data includes 3000 obs. for all of the hospitals in the US.”
b)Describe Variables
Next, review the database you selected and select a variable or variables that are a “bestfit.” That is, choose a variable that quantitatively measures the concept or concepts articulated in your research question or hypothesis.
Return to your previously stated Research Question or Hypothesis and evaluate it considering the variables you have selected. (See the sample Table 1).
Table 1. List of variables used for the analysis
Variable  Definition  Description
of code 
Source  Year 
Total Hospital Beds  Total facility beds set up and staffed
at the end of the reporting period 
Numeric  MN Data  2013 
….  
….. 
Source: UMUC, 2019
***Just in time information:
To cite a dataset, you can go with two approaches:
First, look at the note in the dataset for example;
Medicare National Data by County. (2012). Dartmouth Atlas of Health Care, A
Second, use the online citation, for example:
Zare, H., (2019, May). MN Hospital Report Data. Data posted in University of Maryland University College HMGT 400 online classroom, archived at: http://campus.umuc.edu
See two examples describing the variables from Minnesota Data:
Table 2. Definition of variables used in the analysis
Variable  Definition  Description
of code 
Source  Year 
hospital_beds  Total facility beds set up and staffed
at the end of the reporting period 
Numeric  MN data  2013 
year  FY  Categorical  MN data  2013 
Source: UMUC, 2019
c)Describe the Research Method for Analysis
First, describe the research method as a general (e.g., this is a quantitative method and then explain about this method in about one paragraph. If you have this part in the introduction, you do not need to add here).
Then, explain the statistical method you plan to use for your analysis (Refer to content in week 3 on Biostatistics for information on various statistical methods you can choose from).
Example:
Hypothesis: AZ hospitals are more likely to have lower readmission rates for PN compared to CA.
Research Method: To determine whether Arizona hospitals are more likely to have lower readmission rate than California, we will use a ttest, to determine whether differences across hospital types are statistically significant (You can change the test depends on your analysis).
d)Describe statistical package
Add one paragraph for the statistical package, e.g., Excel or RStudio.
5. Results
Discuss your findings considering the following tips:
▪ Why you needed to see the distribution of data before any analysis (e.g., check for outliers, finding the best fit test; for example, if the data had not a normal distribution, you can’t use the parametric test, etc., so just add 1 or 2 sentences).
▪ Did you eliminate outliers? (Please write 1 or 2 sentences, if applicable).
▪ How many observations do you have in your database and how many for selected variables, report % of missing.
▪ When you are finished with this, go for the next steps:
Present the results of your statistical analysis; include any relevant statistical information (summary tables, including N, mean, std. dev.). Make sure to completely and correctly name all your columns and rows, tables and variables. For this part you could have at least 12 tables and 12 figures (depending on your variables barchart, pichart, or scatterplot), you can use a table like this:
Table 3. Descriptive analysis to compare % of BL in Medicare beneficiary, MD vs. VA 2013
Variable  Obs.  Mean  SD  Pvalue 
Per of Lipid in MD  24  83.20 
2.32 
0.4064 
Per of Lipid in VA 
124 
82.69

4.41

Source: UMUC, 2019
When you have tables and plots ready, think about your finding and state the statistical conclusion. That is, do the results present evidence in favor or the null hypothesis or evidence that contradicts the null hypothesis?
6.Conclusion and Discussion
Review your research questions or hypothesis.
How has your analysis informed this question or hypothesis? Present your conclusion(s) from the results (presented above) and discuss the meaning of this conclusion(s) considering the research question or hypothesis presented in your introduction.
At the end of this section, add one or two sentences and discuss the limitations (including biases) associated with this analysis and any other statements you think are important in understanding the results of this analysis.
References
Include a reference page listing the bibliographic information for all sources cited in this report. This information should be consistent with the requirements specified in the American Psychological Association (APA) format and style guide.
Assignment # (add # here) Quantitative Analysis
Student Name
University of Maryland University College
HMGT400
Professor:
Date
Introduction
A short introduction not more than one or two paragraphs
Method
Hypothesis:
The main research question is that:
Does the nature of a hospital being a critical or noncritical access hospital influence parameters such as the average lengthofstay? For this research question the hypothesis is:
There is no significant difference on average lengthofstay between critical and noncritical access hospitals.
Data
The primary source of data for this research is Minnesota Hospitals Admissions by Care Unit of the Hospital, Fiscal Year 2012 (Health Care Cost Information System, n.d.). The Minnesota Health Care Cost Information System (HCCIS) releases this data set to provide accurate and reliable information about the financial, utilization, and service characteristics of hospitals in Minnesota.
More specifically, this data set provides information on hospital characteristics, such as: affiliations, counties, critical access hospital status, number of available beds, admissions to acute care units, managed and nonmanaged care admissions, and the average lengthofstay. This data set included 145 observations for 25 different variables for all hospitals in the state of Minnesota, USA, for the fiscal year 2012.
Materials and Method
Variable
The variables in play to answer this research question is the average lengthofstay. The other variable used was CAH which was meant to categorize the hospitals into critical and noncritical access hospitals (See Table 1).
Table 1. List of Variables Used for the Statistical Analysis
Variable  Definition  Description
of code 
Source  Year 
Average length of stay  The average length of stay of patients at the hospital  Numeric  Department of Health Minnesota  2012 
CAH  Critical access hospitals. Yes, means it is a critical access hospital while No means it is not a critical access hospital.  Categorical  Department of Health Minnesota  2012 
Source: Department of Health Minnesota, 2012
Method
To formulate an answer to this question and to test this hypothesis the study uses a descriptive quantitative research method. Based on the nature of our data, the most appropriate statistical test would be an independent sample ttest since these two samples are numerical and have no relationship. The data source provides parameters such as the average lengthofstay and a categorical variable. These samples are categorized into critical and noncritical access hospitals with critical access hospitals being represented by “Yes” and noncritical access hospitals being represented by “No” in the CAH column.
Data analysis process
The next step is the data analysis process. The analysis of statistical data required systematic tools and processes to be conducted. The statistical package used for our analysis was RStudio. We were able to create the codes that would execute an unpaired independent sample ttest. “One of the most common tests in statistics is the ttest, used to determine whether the means of two groups are equal. The assumption for the test is that both groups are sampled from normal distributions with equal variances. The null hypothesis is that the two means are equal, and the alternative is that they are not” (Spector, 2014).
Results
The analysis focused on the associations between the average lengthofstay and the status of a hospital as a critical access hospital. Figure 1 shows that the average lengthofstay, the distributions have a tail on the right side that most probably correspond to a set of outliers. After we removed the outliers from the data set, the final fit to the remaining data yielded an almost normal distribution for both variables. Therefore, the use of the unpaired ttest for equality of means is justified.
Of the 145 hospitals providing acute care in the state of Minnesota, 78 (53.8%) were designated as CAHs. The mean for acute care admissions for CAHs was lower (550±535), when compared with admissions for nonCAHs (7895±9690). See Table 2 for more details.
Table 2. Descriptive Analysis of LOS in Critical Access and NonCritical Access Hospitals
N (obs.)  Mean  SD  pvalue  
Critical Access  78  550.58  535.64  0.0000 
NonCritical Access  67  7895.64  9690.44 
Source: Authors findings using Mn data, 2012
After applying a twosample ttest to our data, we found that the mean for acute care admissions in CAHs differs significantly (p<0.0000) from the mean for nonCAHs. It is important to notice that pvalues less than the significance level (0.05) for the variables of interest are evidence against our null hypothesis stating that there is no difference in between the parameters for CAHs and nonCAHs.
Boxplots were generated to visually represent the data. Figure 2 shows you are more likely to have fewer acute care admissions in CAHs when compared to nonCAHs. Similarly, Figure 2b shows that patients in nonCAHs are more likely to have longer stays than their counterpart CAHs.
Discussion
According to data analysis, there is enough evidence to support our research hypothesis that nonCAHs are likely to have more longer average lengths of stay of patients compared to CAHs. Nevertheless, it is important to notice that this correlation does not imply causation. Our study found that the average LOS for CAHs in Minnesota is lower than for nonCAHs.
In this study, CAHs showed reductions in long term services, compared to nonCAH facilities that affected the number of patients treated at these facilities that contributed to overall admissions and, thus, lengthofstay.
Limitation: As in any other study, our report is also subject to limitations. First, unpaired ttest relies on the assumption that the data from the two samples are both normally distributed. Second, further analysis needs to be done on the relationship between critical care and lengthofstay for patients and age, as well as the many other predictor variables that could potentially present a relationship with our response variable.
Conclusion and Policy Recommendations
Write a paragraph and conclude your findings and add one or two policy recommendation
References
Critical Access Hospitals – Rural Health Information Hub. (n.d.). Retrieved September 23, 2018, from https://www.ruralhealthinfo.org/topics/criticalaccesshospitals#locationrequirements
Spector, R. (2014). Using ttests in R. University of California, Berkeley. Department of statistics. Retrieved September 23, 2018 from https://statistics.berkeley.edu/computing/rttests